Home > Insect bug killer > Electric >Stainless steel > Cerber i

Working principle
The Iight attracks and the grid kills. The light comes from special fluorescent tubes (actinic). It is very attractive to flying insects by phototropism (a natural
phenomena well-known to entomologists).The attracted insects are exterminated by touching the electrocutional grid, which is powered by a transformer producing high voltage under low intensity (4000 v / 9 mA). The insects are instantly killed and fall into a detachable recovery container which is located at the bottom of the machine.

Efficient
An important range of products which provide protection in all kinds of use (shops, industries...).

Safe
The high voltage grid is not directly accessible.

Clean
None polluting, without odours.

Installation
The insecticide machines are to be suspended (or hooked) at about 6,5 feet above the floor, away from any sunlight. Be sure that the apparatus is placed between the entrance point of the insects and the space to be protected.

Insectes
Mosquitos, flys, moths, wasps, bees, horseflies... (non exhaustive list).

Applications
Restaurants, cafes, hotels, kitchens, hospitals, food stores, canteens, laboratories, warehouses, agricultural and food industries, pet shops, offices, bedrooms.

	Cerber 30	Cerber 300	Cerber 400/800
	2x15W (30cm)	2x15W (43,5cm)	2x20W / 2x40W (60cm)
	50 m²	70 m²	100-200 m²
	40W maxi	40W maxi	60/100W maxi
	4000 v / 9 mA	4000v / 9 mA	4000v / 9mA
	3,2kg	5kg	5,6kg
	240V / 50Hz	240V / 50Hz	240V / 50Hz